RJCS1-RJCS2
(ANDRTIZ ACP)
Product Description
- Single & Double seal configuration available.
- Balanced Design
- Cartridge Design construction
- Pump Specific Design
| Item No. | Description |
|---|---|
|
1 |
Gland Plate |
|
2,4 |
Primary ring (IB&OB) |
|
2.1,4.4 |
Face |
|
3.5 |
Mating ring |
|
3.1,5.1 |
Face |
|
6 |
Position ring |
|
7 |
Sleeve |
|
8 |
Snap ring |
|
9 |
Spring |
|
10,11 |
Pin |
|
12 |
O ring |
|
13 |
Gasket |
Previous
Next
Technical Feature
- Heat Shrunk faces
- Stationary set of springs which are out of contact prevent clogging
- Milled anti-rotation slots prevent rolling of the body ring that protects the seal face. This eliminates tension peaks that would distort or break the seal face.
- Special double-balanced design allows the use of both pressurised and unpressurised seal water
- The piston design permits free axial movement
Industrial Application
- Paper and pulp industries
- Effluent treatment plants
- This seal is typically used in pumps for abrasive and environmentally hazardous liquids in cooking, evaporation, and causticising acilities in pulp mills.
Operating Limits
- Pressure =15 Kg/CM^2 Max
- Temperature=180 °C
- Speed=20 m/s
- Permissible Axial Movement= ±2.00mm
Available Sizes
- 33mm,43mm,53 mm,60 mm,70 mm,85 mm & 115 mm
Material of Construction
- Seal Face :Carbon Graphite Antimony Impregnated / Carbon Graphite Resin Impregnated / Silicon Carbide / Tungsten-Carbide
- Seat : Carbon Graphite Antimony Impregnated /Carbon Graphite Resin Impregnated/ Silicon-Carbide/ Tungsten-Carbide
- Elastomer: Viton/Aflas/TTV/EPDM/KALREZ
- Metal Parts : S.S.316 / Hast’C
Suitable for pump Models
Andritz ACP Pump Series