RSE2-Shear Mixer
Product Description
- Double seal configuration available
- Double Balanced Design
- Semi-Cartridge Design construction
- Pump Specific Design for AM 10/AM 20 Mixer
| Item No. | Description |
|---|---|
|
1 |
Seal Body |
|
2,5 |
Seal ring |
|
2.1,5.1 |
Face |
|
3 |
Sealing ring |
|
4 |
Pressure |
|
6 |
Seat ring |
|
3.1,6.1 |
Sic ring |
|
7 |
O ring |
|
8 |
Spring |
|
9 |
Drive Screw |
|
10 |
Intermediate Sleeve |
Previous
Next
Technical Feature
- Heat Shrunk faces
- Stationary set of springs which are out of contact prevent clogging
- The piston-type design Enables free axial movement that does not have anyImpact on seal face loading.
- PTFE Used in positions where they are exposed to the process. The PTFE seal advantage is that it does not jam even in process conditions involving a lot of solid material.
- Milled anti-rotation slots prevent rolling of the body ring that protects the seal face. This eliminates tension peaks that would distort or break theseal face.
- Special double-balanced design allows the use of both pressurised and unpressurised seal water.
Industrial Application
Paper and pulp industries
This seal is typically used in Shear Mixer pumps for abrasive and environmentally hazardous liquids in cooking and chemical section
Operating Limits
- Pressure =15 Kg/CM^2 Max
- Temperature=180 °C
- Speed=20 m/s
- Permissible Axial Movement= ±2.00mm
Available Sizes
- 50mm & 60mm
Material of Construction
- Seal Face :Carbon Graphite Antimony Impregnated / Carbon Graphite Resin Impregnated / Silicon Carbide / Tungsten-Carbide
- Seat : Carbon Graphite Antimony Impregnated /Carbon Graphite Resin Impregnated/ Silicon-Carbide/ Tungsten-Carbide
- Elastomer:Viton/Aflas/TTV/EPDM/KALR
- Metal Parts : S.S.316/S.S.304/Hast’C
Suitable for pump Models
- Ahlstrom/Sulzer Shear Mixer AM 10, AM15, AM 20 & AM 25 Models.