RSE2(MC Pump)
Product Description
- Double seal configuration available
- Balanced Design
- Semi-Cartridge Design construction
- Pump Specific Design for Ahlstrom Sulzer/Andritz MC Pumps
| Item No. | Description |
|---|---|
|
1,6 |
Gland plate(IB&OB) |
|
2,4 |
Primary ring |
|
2.1,4.1 |
Face |
|
3,5 |
MR Holder |
|
3.1,5.1 |
Face |
|
7 |
Drive Collar |
|
8 |
Spring |
|
9 |
O ring |
Technical Feature
- Heat Shrunk faces
- Stationary set of springs which are out of contact prevent clogging
- The piston-type design Enables free axial movement that does not have anyImpact on seal face loading.
- PTFE Used in positions where they are exposed to the process. The PTFE seal advantage is that it does not jam even in process conditions involving a lot of solid material.
- Milled anti-rotation slots prevent rolling of the body ring that protects the seal face. This eliminates tension peaks that would distort or break theseal face.
- Special double-balanced design allows the use of both pressurised and unpressurised seal water.
Industrial Application
- Paper and pulp industries
- Effluent treatment plants This seal is typically used in pumps for abrasive and environmentally hazardous liquids in cooking, evaporation, and causticising facilities in pulp mills.
Operating Limits
- Pressure =15 Kg/CM^2 Max
- Temperature=180 °C
- Speed=20 m/s
- Permissible Axial Movement= ±2.00mm
Available Sizes
40mm,50mm,70mm,85mm,110mm,130mm
Material of Construction
- Seal Face :Carbon Graphite Antimony Impregnated / Carbon Graphite Resin Impregnated / Silicon Carbide / Tungsten-Carbide
- Seat : Carbon Graphite Antimony Impregnated /Carbon Graphite Resin Impregnated/ Silicon-Carbide/ Tungsten-Carbide
- Elastomer:Viton/Aflas/TTV/EPDM/KALR
- Metal Parts : S.S.316/S.S.304/Hast’C
Suitable for pump Models
- Ahlstrom/Sulzer/Andritz MC Pumps