RSE2-SLH
Product Description
- Single & Double seal configuration available
- Balanced Design
- Cartridge Design construction
- Equipment Specific Design
| Item No. | Description |
|---|---|
|
1,8 |
Mating ring IB & OB) |
|
2,7 |
Seal ring |
|
3 |
Pressure ring |
|
4 |
Spring |
|
5 |
Sleeve |
|
6 |
Seal body |
|
9 |
O ring |
|
10 |
Intermediate Sleeve |
|
11 |
Gland plate |
|
12 |
Soc.Hd Screw |
|
13 |
Holding Clip |
Technical Feature
- Heat Shrunk faces
- Stationary set of springs which are out of contact prevent clogging
- The piston-type design Enables free axial movement that does not have anyImpact on seal face loading.
- PTFE Used in positions where they are exposed to the process. The PTFE seal advantage is that it does not jam even in process conditions involving a lot of solid material.
- Milled anti-rotation slots prevent rolling of the body ring that protects the seal face. This eliminates tension peaks that would distort or break theseal face.
- Special double-balanced design allows the use of both pressurised and unpressurised seal water.
Industrial Application
- Paper and pulp industries This seal is typically used in Side Entry Agitators
Operating Limits
- Pressure =15 Kg/CM^2 Max
- Temperature=180 °C
- Speed=20 m/s
- Permissible Axial Movement= ±2.00mm
Available Sizes
- 45mm,58mm,77mm & 108mm
Material of Construction
- Seal Face :Carbon Graphite Antimony Impregnated / Carbon Graphite Resin Impregnated / Silicon Carbide / Tungsten-Carbide
- Seat : Carbon Graphite Antimony Impregnated /Carbon Graphite Resin Impregnated/ Silicon-Carbide/ Tungsten-Carbide
- Elastomer:Viton/Aflas/TTV/EPDM/KALR
- Metal Parts : S.S.316/S.S.304/Hast’C
Suitable for Equipment Models
- Sulzer & Ahlstrom SL Series side entry Agitators